Awning Ideas / February 22, 2019 / Sabrina Carey
The manual should also include tips for care and storage when not in use. Usually the kit includes the awning arms and/or braces horizontal rafters and overhanging blinds or shades for added shelter. Many camping enthusiasts choose to set up the awning once they arrive at the campsite and leave up the top part the entire time so it acts as a patio of sorts for the camper. Different camper awning manufacturers offer different types of awnings but you will find a great variety out there. In fact there are many materials colors and styles to choose from. What you decide on all depends entirely on what you like what you need and what you think might work best with your camper. In fact many camper manufacturers will offer some camper awnings as well.
Inquire as to the wind resistance of an awning that you are contemplating buying. What kind of load can the awning support? Do you want something permanent? Would you prefer a retractable awning? The answers to these and many other questions will depend on the kind of weather that is typical of where you live and what kind of budget you have established for just such an expense. A very popular choice and one that can spur on ideas of your one are the Alumawood Awnings. Check out some of the examples on the internet to make proper comparisons. It is quite possible that you are enamored with the more traditional canvas awning look. Most of the manufacturers of this type of awning have been able to integrate a practically unlimited number of colors and designs for your porch.
Most awnings on the side of the vehicle are 2.5 metres x 2 metres or 2 metres by 2 metres. The longer side is usually the one running length ways along your vehicle so make sure you measure to see which is going to sit the best. These things are great and incredibly cheap. In fact you can get a good quality one for under $300 and fit it in around an hour. 4WD Awnings are designed to be set up by one person and very quickly. The procedure normally involves unzipping the case un-clipping the supports rolling the awning out and standing the legs up. The legs are incorporated inside the aluminium frame that the awning rolls out of. Stand them up attach the supports and if it is windy put a few pegs in the ground with guy ropes going to the awning.