Awning Ideas / February 20, 2019 / Katelyn Mooney
Scrub the Awning: While choosing a solution to wash the awning you must ensure that the product does not use any harsh ingredients that can stain or fade the awning fabric. You can also consider using hot water to remove the stains easily. The washing solution can be made by mixing 2 oz. of the dish washing liquid for each gallon of water. You can start the washing process by scrubbing the awning through a brush dipped into the solution. However a harder brush needs to be used to remove tough stains. Rinse the Awning: After scrubbing the awnings you have to soak these completely using a garden hose. While soaking you must pay specific attention to the undersides and corners of the waning. If traces of detergent are left behind there are chances that the awning many get streaked or discolored.
The awning color goes well with white home exteriors. Also you can consider it if your exterior paint has different shades of yellow in it. It is also a good idea to complement your pale yellow exterior paint by installing a mustard yellow awning. Brown: While evaluating the shades of brown awning you must ensure that it adds dimensions to your home exterior paint. Also you can consider creating a seamless transition between the color of your exterior paint and the brown awning. For those who are regularly out and about in their four wheel drive pulling over for lunch is usually controlled by where you can set the vehicle up. You want somewhere that offers shade is out of the wind and out of the way! However with the popularity of 4WD Awnings taking off you may have a much easier solution! 4WD Awnings pull out from the side or rear of your vehicle and set up in a few minutes providing instant protection from the weather.
Most awnings on the side of the vehicle are 2.5 metres x 2 metres or 2 metres by 2 metres. The longer side is usually the one running length ways along your vehicle so make sure you measure to see which is going to sit the best. These things are great and incredibly cheap. In fact you can get a good quality one for under $300 and fit it in around an hour. 4WD Awnings are designed to be set up by one person and very quickly. The procedure normally involves unzipping the case un-clipping the supports rolling the awning out and standing the legs up. The legs are incorporated inside the aluminium frame that the awning rolls out of. Stand them up attach the supports and if it is windy put a few pegs in the ground with guy ropes going to the awning.