Awning Ideas / February 25, 2019 / Irma Logan
Scrub the Awning: While choosing a solution to wash the awning you must ensure that the product does not use any harsh ingredients that can stain or fade the awning fabric. You can also consider using hot water to remove the stains easily. The washing solution can be made by mixing 2 oz. of the dish washing liquid for each gallon of water. You can start the washing process by scrubbing the awning through a brush dipped into the solution. However a harder brush needs to be used to remove tough stains. Rinse the Awning: After scrubbing the awnings you have to soak these completely using a garden hose. While soaking you must pay specific attention to the undersides and corners of the waning. If traces of detergent are left behind there are chances that the awning many get streaked or discolored.
At the same time you also need to concentrate on the style pattern and color of the awning fabric to ensure that the features complement the exterior style and decor of your home. Based on your choice you can buy the awnings in a variety of colors. But you must remember that each color has its own meaning and significance. Also you need to choose an awning color that perfectly complements the color of your home exterior. Red: You have option to choose from several shades of red awnings. Also most shades can match the yellow white and tan exterior paints. You can further enhance the appeal of your home exterior by combining the right shade of blue paint and red awnings. However if the exterior paint has green pigments you have to exercise care while choosing the red awnings.
Most awnings on the side of the vehicle are 2.5 metres x 2 metres or 2 metres by 2 metres. The longer side is usually the one running length ways along your vehicle so make sure you measure to see which is going to sit the best. These things are great and incredibly cheap. In fact you can get a good quality one for under $300 and fit it in around an hour. 4WD Awnings are designed to be set up by one person and very quickly. The procedure normally involves unzipping the case un-clipping the supports rolling the awning out and standing the legs up. The legs are incorporated inside the aluminium frame that the awning rolls out of. Stand them up attach the supports and if it is windy put a few pegs in the ground with guy ropes going to the awning.